St. James Audi - 204.788.1100
Audi Questions and Answers
- Disclaimer*
*The information within the Questions and Answers section must be used in conjunction with the information in the Audi Owner’s Manuals. Please refer to the Owner’s manuals for all information and warnings. By using the site, you acknowledge that you are aware of the warnings and information that must be read within the Owners’ Manuals and will use this information to augment that material.
- I want to change the information in a stored contact, can I do this through the MMI?
Contacts that you have imported into the MMI can be edited. Select the 'Name' function button from the MMI Control Panel, and you can then select the name that you would like to edit by selecting it to display its properties. Scroll to the bottom and choose 'Edit Entry' to make your modifications.
- Where can I find a list of voice commands?
Press the 'Push to Talk' button on the multi-functional steering wheel to activate the voice recognition functionality. Say "help" to hear the possible commands and view them on the screen. Also, the full list of commands is available in your owners manual.
- I've connected my Bluetooth phone, but I cannot access my phonebook. How do I load or view my phonebook entries?
First, you will want to check to make sure that your phone has been approved for use with the MMI system in your particular vehicle model and model year. Visit www.audiusa.com/bluetooth to view this information. This database will also allow you to view which of your phone's features are fully compatible with your MMI system. Please note that even compatible phones may have limitations as noted in the database comments.
After verifying that your phone is compatible, you should check your phone to make sure that your phone synchronization is turned on to allow the loading of the phonebook. Press the 'Telephone' function button, select the 'Memory' control button and turn the knob to 'Import Phone Book' and press the knob to begin the import. If you are still experiencing problems, you may need to clear your 'Received Calls' and 'Dialed' call lists (your phone's instructions will help you clear those call lists).
If these previous steps do not allow you to view the entries, it is also possible that you may need to remove the phone pairing from the MMI and any reference to the MMI from the phone itself and pair the device again.
- Can I add a stopover to my route?
On any trip, you can include multiple stopovers or points of interest while in route to your final destination. To add a stopover, press the 'Navigation' function button and scroll down to 'Add Stopover' and select. Simply enter the address or select 'Point of Interest' and select from the categories in the Point of interest menus. Then select set as destination to add it to your route. By using the "stopover" option, this will be a added as a stop while in route to your end destination.
MMI 3G also allows you to select a location in the map and set this location as a stopover using the control knob and joystick.
